Grp Rtlist - THOMSON speedtouch 610 Cli Reference Manual

GRP Commands

grp rtlist

Show the current routes in the GRP interfaces routing table.
SYNTAX:
grp rtlist
where:
dst
dstmask
EXAMPLE:
=>grp rtlist
Codes : K - Kernel, C - connected, S - Static, R - RIP, * - FIB route
destination : 10.0.0.0/8 *
Route type : "C"
distance : 0
Nexthop : eth
destination : 10.0.0.0/8
Route type : "K"
distance : 1
Nexthop : 10.0.0.147
destination : 127.0.0.0/8 *
Route type : "C"
distance : 0
Nexthop : loop
destination : 129.132.2.21/32 *
Route type : "K"
distance : 2
Nexthop : 138.203.7.146
destination : 172.16.1.0/24 *
Route type : "C"
distance : 0
Nexthop : cip0
destination : 172.16.1.0/24
Route type : "K"
distance : 2
Nexthop : 172.16.1.1
=>
RELATED COMMANDS:
grp ifconfig
206
[dst = <ip-address>]
[dstmask = <ip-mask(dotted or cidr)>]
The destination IP address of the route.
Supports ip/mask notation.
The destination IP address mask, either in dotted or in numerical cidr
notation.
Configure an interface's routing parameters.
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0