Ethoa Ifadd - THOMSON speedtouch 610 Cli Reference Manual

ethoa ifadd

Create a new ETHoA interface.
SYNTAX:
ethoa ifadd
where:
intf
dest
EXAMPLE:
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
=>phonebook list
Name Type
Br1 bridge
Br2 bridge
CIPPVC3 cip
CIPPVC4 cip
=>ethoa ifadd intf=Moreethoa dest=Br4
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
Moreethoa : dest : Br4
Retry : 10
Connection State : not-connected
=>
RELATED COMMANDS:
ethoa ifattach
ethoa ifconfig
ethoa ifdelete
ethoa ifdetach
ethoa iflist
E-DOC-CTC-20040210-0028 v3.0
[intf = <string>]
[dest = <phonebook entry>]
The name for the new ETHoA interface.
If not specified, the destination will double as interface name.
The destination for the new ETHoA interface.
Typically, a phonebook entry.
QoS : default
frames: 0
frames: 0
Use Address
1 8.35
1 8.36
1 8.82
1 8.83
QoS : default
frames: 0
frames: 0
QoS : default
Attach an ETHoA interface.
Configure an ETHoA interface.
Delete an ETHoA interface.
Detach an ETHoA interface.
Show current ETHoA interfaces.
Encaps : llc/snap
dropframes: 0
Encaps : llc/snap
dropframes: 0
Encaps : llc/snap
ETHoA Commands
OPTIONAL
OPTIONAL
Fcs : off
Fcs : off
Fcs : off
171