Nat List - THOMSON speedtouch 610 Cli Reference Manual

NAT Commands

nat list

Lists NAT/PAT connection database.
SYNTAX:
nat list
where:
addr
EXAMPLE:
=>nat list
Indx Prot Inside-addr:Port Outside-addr:Port Foreign-addr:Port Flgs Expir State
1 6 10.0.0.138:80
2 17 10.0.0.138:138
3 17 10.0.0.138:137
4 17 10.0.0.138:7938
5 17 10.0.0.138:513
6 17 10.0.0.138:111
=>
RELATED COMMANDS:
nat create
nat delete
nat disable
nat enable
376
[addr = <ip-address>]
An address-translation enabled IP address.
If no address is specified, all IP addresses are shown.
Note
172.16.0.5:1080
10.0.0.140:138
10.0.0.140:137
10.0.0.140:7938
10.0.0.140:513
10.0.0.140:111
Create a static NAT/PAT entry.
Delete a static NAT/PAT entry.
Disable NAT/PAT on a SpeedTouch™ IP address.
Enable NAT/PAT on one of the SpeedTouch™ IP addresses.
0.0.0.0:0 19
10.0.0.20:138 11
10.0.0.254:137 11
10.0.0.96:4756 11
10.0.0.109:513 11
10.0.0.96:4756 11
OPTIONAL
Control
8 9
20 10
20 10
20 10
20 10
20 10
E-DOC-CTC-20040210-0028 v3.0