Pppoe Ifdetach - THOMSON speedtouch 610 Cli Reference Manual

pppoe ifdetach

Detach a PPPoE interface.
SYNTAX:
pppoe ifdetach
where:
intf
EXAMPLE:
=>pppoe iflist
PPPoE1: dest : PPPoE1
Retry: 10 QoS
mode = IP Routing
flags = echo magic
trans addr = pat
route = 0.0.0.0/0 - 0.0.0.0/0 (metric 0)
user name = guest
admin state = up
LCP: state = initial
IPCP: state = initial
=>pppoe ifdetach =intf=PPPoE1
=>pppoe iflist
PPPoE1: dest : PPPoE1
Retry: 10 QoS
mode = IP Routing
flags = echo magic
trans addr = pat
route = 0.0.0.0/0 - 0.0.0.0/0 (metric 0)
user name = guest
admin state = down
LCP: state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
pppoe ifadd
pppoe ifattach
pppoe ifconfig
pppoe ifdelete
pppoe iflist
E-DOC-CTC-20040210-0028 v3.0
intf = <intfname>
The name of the PPPoE interface.
default encaps
accomp restart mru
mru = 1492
password = ********
oper state = up
retransm = 0
retransm = 10
default encaps
accomp restart mru
mru = 1492
password = ********
oper state = down
retransm = 10
retransm = 0
Create a new PPPoE interface.
Attach a PPPoE interface.
Configure a PPPoE interface.
Delete a PPPoE interface.
Show current PPPoE configuration.
VC-MUX
addr route savepwd
link state = connected
term. reason =
term. reason =
VC-MUX
addr route savepwd
link state = not-connected
term. reason =
term. reason =
PPPoE Commands
REQUIRED
PPPoEOA
PPPoEOA
415