THOMSON speedtouch 610 Cli Reference Manual page 38

CLI Navigation
FTP File Transfer
To allow correct file transfers, set the transfer mode to "binary".
Turn on the hashing option to see the progression of the file transfer.
Note
Example:
/home/doejohn{1}$ftp 10.0.0.138
Connected to 10.0.0.138
220 Inactivity timer = 120 seconds. Use 'site idle <secs>' to change.
Name (10.0.0.138:doejohn):
331 SpeedTouch™ (00-90-D0-01-02-03) User 'doejohn' OK. Password required.
Password : ######
330 OK
ftp>
ftp>bin
200 TYPE is now 8-bit binary
ftp>
ftp>hash
200Hash mark printing on (8192 bytes/hash mark).
ftp>
Quote Site Command
All the CLI commands can be executed from within an FTP session. Only complete CLI commands (i.e. the complete
command syntax with all the parameters already specified) can be executed.
Example:
To execute the 'firewall list' command, type the following at the FTP prompt:
ftp> quote site firewall list
200- :firewall assign hook=input chain=None
200- :firewall assign hook=sink chain=sink
200- :firewall assign hook=forward chain=forward
200- :firewall assign hook=source chain=source
200- :firewall assign hook=output chain=None
200-
200 CLI command "firewall list" executed
ftp>
36
E-DOC-CTC-20040210-0028 v3.0