Pppoa Rtdelete - THOMSON speedtouch 610 Cli Reference Manual

pppoa rtdelete

Delete the route specification for a PPPoA link.
Use the command pppoa ifdetach for this interface prior to deleting route configurations.
Note
SYNTAX:
pppoa rtdelete
where:
intf
EXAMPLE:
=>pppoa iflist
pppoa: dest : pppoa
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route = 10.0.0.2/24 - 172.16.0.5/24 (metric 1)
auth = auto user = johndoe@ISP
admin state = up
LCP : state = starting
IPCP: state = initial
=>pppoa rtdelete intf=pppoa1
=>pppoa iflist
pppoa_pppoa: dest : pppoa
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
auth = auto user = johndoe@ISP
admin state = up
LCP : state = starting
IPCP: state = initial
=>
RELATED COMMANDS:
pppoa rtadd
E-DOC-CTC-20040210-0028 v3.0
intf = <intfname>
The PPPoA interface name for which to delete the route settings.
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = down
retransm = 1
retransm = 0
[00:00:00]
encaps VC-MUX
trans addr = pat mru = 1500
password = ********
oper state = down
retransm = 1
retransm = 0
Configure a route specification for an upcoming PPPoA link.
link state = not-connected
term. reason =
term. reason =
link state = not-connected
term. reason =
term. reason =
PPPoA Commands
REQUIRED
403