Atm Oam Ccconfig - THOMSON speedtouch 610 Cli Reference Manual

ATM Commands

atm oam ccconfig

Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
SYNTAX:
atm oam ccconfig
where:
port
vpi
vci
transmit
receive
auto
span
RELATED COMMANDS:
atm oam cclist
atm oam ccsend
42
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
The ATM port number.
Choose between:
•
DSL0
•
DSL1
•
ATM2
•
ATM3
•
AAL5
•
ATM5.
Or specify a port number (dsl0 has port number 0, ..., atm5 has port
number 5).
A number between 0 and 15.
Represents the Virtual Path Identifier (VPI)
A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
For a VP cross-connection, use VCI=0 or do not specify.
Enable or disable transmission of CC cells.
The default is disabled.
Enable or disable loss of continuity.
The default is disabled.
Enable or disable remote CC activation and deactivation.
The default is disabled.
End2end or segment continuity check.
Show current CC configuration.
Send CC activate/deactivate to connection.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0