Bridge Ifdetach - THOMSON speedtouch 610 Cli Reference Manual

bridge ifdetach

Detach (i.e. disconnect) a bridge interface.
SYNTAX:
bridge ifdetach
where:
intf
EXAMPLE:
=>bridge iflist intf=TestBridge
TestBridge: dest : TestBridge
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 0
TX bytes: 0
=>bridge ifdetach intf=TestBridge
=>bridge iflist intf=TestBridge
TestBridge: dest : TestBridge
Retry : 10
Connection State: not-connected
Port: (Unassigned)
=>
RELATED COMMANDS:
bridge ifadd
bridge ifattach
bridge ifconfig
bridge ifdelete
bridge iflist
E-DOC-CTC-20040210-0028 v3.0
intf = <intfname>
The name of the bridge interface to be detached.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
QoS : default Encaps : llc/snap
PortNr: 5 PortState: forwarding
frames: 0
frames: 0
QoS : default Encaps : llc/snap
PortNr: (Unknown)
Create a bridged Ethernet interface.
Attach a bridge interface.
Configure a bridge interface.
Delete a bridge interface.
Show current bridge configuration.
Fcs : off
dropframes: 0
Fcs : off
PortState: forwarding
Bridge Commands
REQUIRED
71