THOMSON speedtouch 610 Cli Reference Manual page 216

GRP Commands
authstring
passive
splithorizon
EXAMPLE:
=>grp rip ifconfig
intf = PPPoE_1
[rip] = off
[txversion] = rip_unspec
[rxversion] = rip_unspec
[authmode] = none
[authstr] =
[passive] = off
[splithorizon] = on
:grp rip ifconfig intf=PPPoE_1
=>
RELATED COMMANDS:
grp rip ifconfig
grp rip flush
214
Configure the authentication string for the RIP authentication
password.
Leave authstring unspecified in case the authentication mode is none.
Enable (on) or disable (off) the passive interface status for this interface.
The default is on.
Enable (on) or disable (off) the split horizon status for this interface.
The default is on.
Show RIP configuration and current RIP Routing table.
Flush RIP interface settings and global parameters.
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0