The Help Command
Execute help or ? from top level to list all available commands and command groups for the SpeedTouch™.
Example for the SpeedTouch™610 ADSL/POTS variant:
=>help
Following commands are available :
help
: Displays this help information
menu
: Displays menu
?
: Displays this help information
exit
: Exits this shell.
..
: Exits group selection.
saveall
: Saves current configuration.
Following command groups are available :
adsl
atm
config
dhcp
ethoa
firewall
ipqos
ipsec
phonebook
pppoa
script
sip
switch
syslog
=>
You can execute the help or ? command from each command group selection. This results in a list of the available
commands (and nested command groups, if available) in this particular command group.
Example:
=>firewall
[firewall]=>
[firewall]=>?
Following commands are available :
tron
: Enables verbose console messaging.
troff
: Disables verbose console messaging.
match
: Defines an ip packet match.
assign
: Assign a chain to an entry point.
list
: Shows a list of all the hooks with the chain attached.
flush
: Clears all hooks. If a hook is provided, that hook is cleared.
Following command groups are available :
chain
rule
[firewall]=>
As both help and ? have the exact same functionality in the SpeedTouch™ CLI, the help command may always be equally
replaced by the ? command.
Executing e.g. help firewall from top level gives the same result as executing help from the firewall command group
selection.
E-DOC-CTC-20040210-0028 v3.0
autopvc
bridge
dns
env
grp
ip
label
language
pppoe
pptp
snmp
sntp
system
td
cip
eth
ipoa
nat
qosbook
software
upnp
CLI Navigation
25