Sntp Add - THOMSON speedtouch 610 Cli Reference Manual

SNTP Commands

sntp add

Add a Network Time Protocol (NTP) server to the NTP server list to synchronize the internal SpeedTouch™ real time
clock (SNTP client) with.
SYNTAX:
sntp add
where:
addr
version
EXAMPLE:
=>sntp list
IP Address Version
100.101.110.113
=>sntp add addr=100.101.110.111
=>sntp list
IP Address Version
100.101.110.111
100.101.110.113
=>
RELATED COMMANDS:
sntp del
sntp list
494
addr = <ip-address>
[version = <number{1-4}>]
The IP address of the NTP server to add to the list.
The SNTP version of the NTP server.
Select either 1, 2, 3, or 4 following NTP server supported versions.
Status
4 Synchronized
Status
4 contacting ...
4 Synchronized
Remove an NTP server from the NTP server list.
List currently configured NTP servers.
REQUIRED
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0