THOMSON speedtouch 610 Cli Reference Manual page 94

Config Commands
SYNTAX:
config load
where:
load_ip
defaults
flush
echo
filename
EXAMPLE:
=>ip rtlist
Destination
10.0.0.0/24
172.16.0.5/32
10.0.0.140/32
127.0.0.1/32
172.16.0.0/24
=>config flush flush_ip=no
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>config load flush=yes
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
172.16.0.5/32
127.0.0.1/32
172.16.0.0/24
=>
RELATED COMMANDS:
config erase
config flush
config save
92
[load_ip = <{no|yes}>]
[defaults = <{yes|no}>]
[flush = <{yes|no}>]
[echo = <{no|yes}>]
[filename = <string>]
Load IP settings (yes) or not (no).
Not keeping the IP settings could cause lost IP connectivity in
Note
the LAN.
Load default configuration (yes) or saved configuration (no).
If this parameter is not specified, the saved configuration will
Note
be loaded.
Flush the current configuration before loading a new configuration (yes)
or not (no).
Echo each command string when loaded (yes) or not (no).
Configuration filename.
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Erase a user configuration file.
Flush complete runtime configuration.
Save current runtime configuration.
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
Intf Mtrc
eth0 0
eth0 0
cip1 0
loop 0
cip1 1
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0