System Reset - THOMSON speedtouch 610 Cli Reference Manual

System Commands

system reset

Reset the SpeedTouch™ to its factory default settings and reboot the device. All user and Service Provider specific
settings and all saved configuration changes are lost after reboot.
SYNTAX:
system reset
where:
factory yes/no
proceed no/yes
EXAMPLE:
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
<factory=no>
factory yes/no = no
proceed no/yes = no
:system reset factory yes/no=no proceed no/yes=no
=>
=>system reset
---------------
!! WARNING !!
---------------
The modem will be reset to (factory) defaults clearing all user (and ISP) settings.
Specifying <factory=yes> deletes user and ISP specific settings.
<factory=no>
factory yes/no = yes
proceed no/yes = yes
:system reset factory yes/no=yes proceed no/yes=yes
.....
(lost session connectivity due to reboot)
.....
528
factory yes/no = <{yes|no}>
proceed no/yes = <{no|yes}>
Proceed with resetting the SpeedTouch™ device to its factory
default settings (yes) or not (no).
By default, the system reboot command is discarded if
Note
no explicit positive confirmation is given.
Confirmation for resetting the modem.
Connectivity with the ISP network might be lost.
deletes user specific settings only.
Connectivity with the ISP network might be lost.
deletes user specific settings only.
REQUIRED
REQUIRED
E-DOC-CTC-20040210-0028 v3.0