Atmf Add - THOMSON speedtouch 610 Cli Reference Manual

ATMF Commands

atmf add

Add a Virtual Path (VP) or Virtual Channel (VC) cross-connection between the ATMF-25.6Mb/s interface and the WAN
interface.
SYNTAX:
atmf add
where:
vpi
vci
qos
RELATED COMMANDS:
atmf delete
atmf list
50
vpi = <number {0-7}>
[vci = <number {0-511}>]
[qos = <{default}>]
A number between 0 and 7.
Represents the Virtual Path identifier.
A number between 0 and 511.
Represents the Virtual Channel identifier.
For a VP cross-connection, use VCI=0 or do not specify.
The name of the Quality of Service (QoS) book entry to apply on
this cross-connection. Use the command qosbook list for a list of
available qosbook entries.
The default is default.
Delete a cross-connection on the ATMF-25.6Mb/s interface.
Show current ATMF-25.6Mb/s interface configuration.
REQUIRED
OPTIONAL
OPTIONAL
E-DOC-CTC-20040210-0028 v3.0