Lexicon RV-8 Service Manual page 67

Lexicon
IR Remote Test
This test verifies that the unit can respond to infrared commands from the infrared remote.
Remote Setup:
1. Set the remote control to its default menu by pressing the HOME button.
The LCD display on the remote control should appear as in Figure A below.
2. Press the top left MAIN button once to open the MAIN menu.
The LCD display on the remote control should appear as in Figure B below.
Figure A: HOME MENU
Figure B: MAIN MENU
Note:
The RV-8 will NOT respond to the PAGE, HOME, FAV, M1, M2 and M3 buttons.
3. RV-8 Setup: The front panel display should indicate:
"IR REMOTE TEST
Remote Test:"
5-13