Lexicon RV-8 Service Manual page 14

Preamp Output Level
Preamp Output Impedance
* Combined measurements of preamplifier and power amplifier sections
Zone 2 and Zone 3 Audio Performance
A/D Conversion
D/A Conversion
Frequency Response
THD + Noise
Dynamic Range
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Preamp Output Level
Preamp Output Impedance
Video Input and Output Connectors
Video Inputs
Video Outputs
Composite and S-video Performance
Compatibility
Switching
Output Level
Impedance
3-2
150mVrms typical, 6Vrms maximum (RCA connectors)
Maximum value with full-scale input signal and volume at +12dB
500Ω in parallel with 150pF (RCA connectors)
24-bit, 44.1 to 96kHz, multi-bit ∆Σ architecture (Zone 2 only)
24-bit, 44.1 to 192kHz, multi-bit ∆Σ architecture
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz
Below 0.005% at 1kHz, (1Vrms output level)
101dB minimum, 22kHz bandwidth
101dB minimum, 22kHz bandwidth
200mVrms (4Vrms for maximum output level)
100kΩ in parallel with 150pF
200mVrms typical, 4Vrms maximum; maximum value with full-scale input
signal and volume at 0dB
300Ω in parallel with 150pF
5 composite (RCA), 5 S-video and 3 component video (RCA)
5 composite (RCA), (2 monitor, 2 Zone2, 1 Zone3), 4 S-video (2 monitor,
2 Zone2) and 1 component (RCA)
NTSC, PAL and SECAM
Active
1.0V peak-to-peak
75Ω
RV-8 Service Manual