Headlamp Bulbs Replacement; Tail Light - Husqvarna TE 250 - 310 2011 I.E. Specifications - Operation - Maintenance

HEADLAMP BULBS REPLACEMENT (TE)
To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to
the instrument panuel support (A);
- push forward the headlamp carrier (B) and pull it towards the
high (C) in order to uncouple from the two lower supports.
- remove the headlamp carrier;
C
B
EN - 52
- remove the two filaments bulb (7) connector (2) and the boot
(3);
- remove the screw (6);
- release the bulb holding spring (4) and then the bulb itself.
To replace the parking light bulb (5) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
5
4
A
5
2

TAIL LIGHT

The back light is a LED light.
3
7
6
4
3