Pivot Bushing Replacement; Swingarm Installation - Honda 86-87 TA200 FATCAT Service Manual

REAR WHEEL/BRAKE/SUSPENSION
PIVOT BU SHING REPLA CEMENT
Drive out the swingarm pivot bushings.
Drive in new pivot bushings.
TOOLS :
Driver
Attachment, 42 )( 47 mm
INSTALLATION
07749 - 0010000
07746 - 0010300
Apply grease to the cotlar end dust seals.
Install the drive chain slider using the bolts.
inst all the rubbe r protector .
Install the coller and dust seal caps.
Install the swingarm into the frame and install t he pivot bolt
and nut .
Tighten the pivot nut.
TORQUE: 80 - 100 N·m 1 8 .0 - 10.0 kg -m. 58 - 72 ft -Ibl
Check t he swingarm for proper operation.
12-14
121 ATTA6<MEINT
t21 PIVOT
cuee,,"
(2) RUBBER PROTECTOR
,
(11 DAIVE
,
/ '
•
SLIDER