Brake Drum; Brake Lining; Brake Panel Disassembly - Honda 86-87 TA200 FATCAT Service Manual

FRONT BRAKE
Remove the front wheel (page 11 · 5).
Remove the front brake panel.
BRAKE DRUM
Measure the brake drum 1.0.
SERVICE LIMIT: 111 mm 14.4 in)
Bend down the lock washer tabs.
Remove the drum mounting bolts and lock washer.
Remove the brake drum from the front hub.
Install the brake drum in the reverse order of removal.
Install a new lock washer and tighten the bolts.
TORQUE : 25 - 35 .N·m 12.5-3 .5 kg.m, 18 -25 ft·lbl
Bend up the lock washer tabs against the bolt head.
BRAKE LINING
Measure the brake lining thickness .
SERVICE LIMIT : 2.0 mm 10.08 in)
Contaminated brake linings
lettuce
slOpping power. Keep
grease off the linings.
Brake dust contains asbeslM which can be harmful 10 your
health. Do not
Wit
compressed air 10 clean brah parts. Use
I'Qcuum with Q sealed dust t:oflecror. Wear a protecti"e lace
mask and wlllh )'our hands "'hen finished.
BRAKE PANEL DISASSEMBLY
Put marks on the brake shoes before removing them so that
they can be installed in their original positions.
Remove the brake shoes.
NOTE
• Replace brake shoes in pairs.
Remove the brake shoes.
FRONT WHEEl/BRAKE/SUSPENSION/STEERING
(1)
BRAKE SHOES
11-13