Steering Stem Removal - Honda 86-87 TA200 FATCAT Service Manual

INSTALLATION
Install the fork and temporarily tighten the lower pinch bolts.
Install the fork upper bolt with the O-ring and loosen the lower
pinch bolts, then tighten the fork upper bolt.
TORQUE : 50 - 60 N·m (5.0 - 6 .0
kg-m.
36 - 43
ft -Ibl
T ighten the lower pinch bolt.
TORQUE: 30 - 40 N-m (3 .0 - 4.0 kg-m , 22 - 29 ft -Ibl
Push up the fork boot until it just touches the bottom of the
steering stem then tighten its clamp.
Install the front wheel Ipage 11-71.
Connect the front brake cable to the cable clamps and install
them onto the fork tub. Tighten the clamp bolts.
STEERING STEM
REMOVAL
Remove the headlight case from the headlight bracket Ipage
, 7-21.
Remo ve the headlight bracket by removing two bolts.
Remove the handlebar lower holder mounting nuts and handle-
bar from the fork top bridge.
Remove the front fender (page 13-2).
FRONT WHEELI BRAKEI SUSPENSIONI STEERING
(3) FORK PINCH BOLTS
•
(11 FRONT FENDER
I
11 -21