Cylinder Head Cover Removal - Honda 86-87 TA200 FATCAT Service Manual

CYLINDER HEAD COVER REMOVAL
Remove the engine from the frame (Section 5).
Remove the valve adjuster cover.
Remove the rotor-csp and timing hole <;8p from the left crank-
case cover.
Remove the liming hole cap from the cylinder head cover.
Align the
" T'l mark
on the flywheel with the index mark on the
Ileft crankcase cover.
Turn the crankshaft slowly until timing indicator plale faces up
to position the cam lobes down.
Remove the six bolts and breather cover.
Remove the a-rings from the cylinder head cover.
Remove the cylinder head cover mounting bolts and nut.
Remove the cylinder head cover and dowel pins.
Remove the rubber gasket from the cylinder head cover.
CY LINDER HEAD/VALVES
m
INDICATOR PLATE
6-3