Crankshaft Removal; Crankshaft Inspection - Honda 86-87 TA200 FATCAT Service Manual

CRANKCASE/CRANKSHAFTITRANSMISSION
CRANKSHAFT
REMOVAL
Remove the transmission Ipage 10-4 ).
Remove the crankshaft from the left crankcase using a hydrau-
lic press.
If the left crankshaft bearing remiens on the cranksha ft ,
remove it with bearing puller.
TOOL:
Universal bearing puller
07631 - 0010000
or
Equivalent co mme rcially
available In U.S.A .
If the bearing remains in the left crankcase, remove it with the
driver and attachment.
TOOLS:
Driver
Attachment , 42
It
47 mm
07749 - 0010000
07746 - 0010300
Discard the left crankshaft bearing .
NOTE
Always replace the left bearing with a new one whenever
the cra nkshaft is removed hom the leh crankcase.
INSPECTION
Set the crankshaft on a stand or V -blocks and read the tunout
using dial indicators.
SERVICE LIMIT: Right 0 .06
mm
(0 .002 in)
Left 0 .03 mm (0 .001 in)
Measure the side clearance between the connecting rod big
end and the crankshaft flyweight with a feeter gauge.
SERVICE LIMIT : 0 .8
mm
(0.03
in)
10-10
I~
(1)
UNIVERSAL BEARING PULLER
(1)
RIGHT
(21 LEFT
6 mm (C.2in)
3
mm
(0.
lin)
(11 FEELER GAUGE