Headlight Bulb Replacement; Headlight Case Removal/Installation - Honda 86-87 TA200 FATCAT Service Manual

LIGHTS/SWITCHES
HEADLIGHT
BULB REPLACEMENT
Remove the two headlight case mounting bolts.
loosen the two headlight bracket flange bolts on the top
bridge.
Pull out the bulb socket rubber and turn the bulb socket.
Replace the bulb with a new one.
Install the headlight bulb in the reverse order of removal.
HEADLIGHT CASE REMOVAL/INSTALLATION
Remove the headlight bulb and disconnect the ignition switch
wires and coupler (page 17-4). handlebar switch coupler and
wires, and the neutral indicator coupler.
Disconnect the choke cable at the carburetor and free the
choke cable from the f ra me.
Remove the headlight case.
Install the headlight case in the reverse order of removal.
(1) NEUT,RAL INDICATOR LIGHT
•
17-2
CASE MOUNTING BOl lSt.
(2) IGNITION SWITCH
(3) HEADLIGHT CASE
(4) CHOKE CABLE