Gearshift Linkage - Honda 86-87 TA200 FATCAT Service Manual

CLUTCH/KICK STARTER/GEARSHIFT LINKAGE
Install the following:
- III clutch springs
- (2) lifter plate
- (3) clutch bolts
- (4) bearing
- (5) lifter cam plate
- (6) ball retainer with thrust spring
Install the centrifugal clutch (page 8 -9).
Inslall the clutch lifter sub-lever.
Make sure that the position the clutch lifter sub-Ie'ller at the
groove in the 'ifter cam .
Align the steel ball in the ball retainer with the clutch lifter sub-
lever.
Install the right crankcase cover (page 8- 181.
GEARSHIFT LINKAGE
Remove the left footpeg mounting bolts, gearshift arm bolt
and gearshift/ left footpeg .
Remolle the centrifugal clutch (page 8 -5) and manual clutch
(page
8· 10).
Unhook the shih arm spring from the gearshift plate.
Pull out gearshift spindle assembly from the crankcase.
8-14
121 LEFT FOOTPEG MCIU'ITII"G
GE.'R';HIIFT
SPINDLE