Stator Replacement; Flywheel Removal - Honda 86-87 TA200 FATCAT Service Manual

Remove the gasket and two dowel pins.
ALTERNATOR/ STARTER CLUTCH
, STATOR REPLACEMENT
Disconnect the pulse generator wire, and remove the pulse
generator and wire clamp.
Remove the wire grommets and three bolts, and remove the
stator from the left crankcase cover.
Install the stator onto the left crankcase cover properly.
Apply locking agent to the stator bolts threads and tighten the
bolt.
Install the wire grommets into the groove in the cover secure-
ly.
Install the pulse generator and wire clamp with the socket
bolts.
Clamp the pulse generator wire onto the pulse generator and
connect it to the terminal.
FLYWHEEL REMOVAL
Hold the flywheel with the flywheel holder and remove the fly-
wheel bolt.
TOOL:
Flywheel holder 07725 - 0040000 or strap wrench commer-
cially available in U.S. A .
AL TERNATORI STARTER CLUTCH
111
GR\~~~,.".
_ _
(2) PULSE G""RA
(1)
PULSE GENERATOR
(2)
TERMINAL
9-3