Table of Contents
Advertisement
2.
3.
Once you have completed filling in the Menu 3.3, press ENTER at the
save message to save your selections, or press ESC at any time to
cancel your selections.
LAN-to-LAN Application
A typical LAN-to-LAN application is to use the IRT-1002 to call from a
branch office to headquarters such that all of the stations on the branch
office network have access to the server at the headquarters, as
depicted in the following diagram:
74
Frame Type—For every frame type that the IRT-1002 needs to
support, you need to set the corresponding field to Yes. The
frame type(s) selected here must be the same frame type(s) as
the server or client stations on that network. Otherwise, the
devices will not be able to communicate. You can select one or
more of these four frame types:
◊ 802.2
◊ 802.3
◊ Ethernet II
◊ SNAP
IPX Network #—If you selected the IRT-1002 to act as a seed
router, you need to provide a unique network number to be
associated with the network that the IRT-1002 has joined. Keep in
mind that this number must not be used anywhere else on the
entire Internetwork.
PLANET ISDN Router
Advertisement
Table of Contents
