Novell IPX Filter Rule
This section will show you how to configure the protocol-dependent
parameters for an IPX filter. The fields in the menu are displayed in
bold type.
1.
IPX Packet Type—Enter the IPX packet type value of the packet
you wish to filter. This setting should be a one-byte value,
expressed in hexadecimal..
2.
Destination/Source
destination/source network numbers of the packet that you wish to
filter.
3.
Destination/Source Node #—Enter in the six hex-byte value for
the destination/source node number of the packet you wish to
filter.
4.
Destination/Source Socket #—Enter the destination/source
socket number of the packets that you wish to filter. This should
be a 4-byte hex value.
5.
Destination/Source Socket # Comp—You can select what
comparison quantifier you wish to use to compare to the value
given in Destination Socket # and Source Socket #.
IRT-1000 series User's Guide
Network
#—Enter
the
four
hex-byte
97