Planet IRT-1001ST User Manual page 37

1.
Switch Type—This field is fixed as DSS1 or 1TR6.
2.
B Channel Usage—This field is fixed as Switch/Switch.
3.
ISDN Data & Subaddress—Enter the telephone number and
subaddress assigned to the ISDN data call for the router. It will be
used as the outgoing CGPN(Calling Party Number) setting for
ISDN data calls. Note that the router only accepts digits; do not
include—and spaces in this field. This field should be no longer
than 19 digits for the number and 5 digits for the Subaddress. The
Subaddress is only available for DSS1.
4.
Dial Prefix to Access Outside Line—Enter the prefix number if
the router is connected to an ISDN PBX. This number will be
added to all outgoing calls and should be no longer than 3 digits.
Otherwise, leave this field blank.
5.
PBX Number (with S/T Bus Number)—Enter the S/T bus
number if the router is connected to an ISDN PBX. If this field is
left as blank then the loopback test will be skipped.
When you are finished, press ENTER at the message 'Press ENTER to
Confirm...' to save your selections, or press ESC to cancel. When you
press ENTER, the router will use the information that you entered to
initialize the ISDN link to the telephone company switch. It should be
noted that whenever the switch type is changed, the ISDN initialization
IRT-1000 series User's Guide
29