Table of Contents
Advertisement
1.
2.
3.
4.
5.
100
From the Main Menu, select option 22. SNMP Configuration. This
will bring you to Figure 12.1 Menu 22—SNMP Configuration.
You will then be prompted to enter the following information.
Steps 3 -7 will describe the specific parameters involved in the
configuration. The parameters you will have to fill in will be
indicated in bold type.
Get Community—From this field, you can determine what the
Get Community is for your IRT-1002. The value entered into this
field will be used to authenticate the community field for incoming
Get- and GetNext- requests from the management station. The
default is public.
Set Community—In this field, enter the Set Community for your
IRT-1002. The value entered in this field will be used to
authenticate the community field for incoming Set- requests from
the management station. The default is public.
Trusted Host—Enter the IP address of the Trusted Host SNMP
management station. If this field is configured, the IRT-1002 will
only respond to SNMP messages coming from this address. If you
leave the field blank (default), the IRT-1002 will respond to all
SNMP messages it receives, regardless of origin.
PLANET ISDN Router
Advertisement
Table of Contents
