Table of Contents
Advertisement
(internal network number = 444). A static route is used to resolve this
problem by providing the router with some static routing information to
access the remote server.
From Menu 12, select one of the four possible IPX Static Routes as
shown below:
1.
2.
3.
4.
5.
78
Server Name—In this field, enter in the name that has been
configured for the server. This name must be the exact name
configured in the NetWare server.
Network #—This field contains the internal network number of the
remote server which you wish to access. Do not use 00000000 or
FFFFFFFF for this field.
Node #—This field contains the address of the node on which the
server resides. If you are using a Novell IPX implementation, this
value is 000000000001.
Socket #—This field contains the socket number on which the
server will receive service requests. The default for this field is
hex 0451.
Type #—This field identifies the type of service the server
provides. The default for this field is hex 0004.
PLANET ISDN Router
Advertisement
Table of Contents
