Table of Contents
Advertisement
4.
Port #—The IP port address used by the authentication server.
The default value of 1645 should be used.
5.
Key—A " password" used to identify the IRT-1002 as a valid client
of the RADIUS authentication service.
The Key password should be stored in the client file in the RADIUS
server's /etc/raddb directory. Lines of the form
# Client Name
#-----------------------------
192.168.0.1
should be added to the client file. The Client Name field in the file
gives the IP address of the IRT-1002, and the Key field should be the
same as the Key field in Menu 23.2.
After a RADIUS server has been configured, the IRT-1002 will use it to
authenticate all users that it can't find in its internal Dial-Up User List
(Menu 14).
Adding Users to the RADIUS Database
The IRT-1002 only uses the RADIUS database for user authentication;
except for Password, Dialback-No, and the PLANET extensions
PLANET-Callback-Option and PLANET-Callback-Phone-Source
(described below), most standard RADIUS attribute fields are ignored by
the IRT-1002.
To add a user to the RADIUS database, edit the users file in the
RADIUS server's /etc/raddb directory, and add a line similar to the
following:
joeuser
Each user should have a user name/password record in the users
database.
IRT-1000 series User's Guide
Key
1234
Password = "joepassword"
107
Advertisement
Table of Contents
