Table of Contents
Advertisement
Editing PPP Options
1.
2.
3.
4.
50
Encapsulation—Select CCP (Compression Control Protocol) for
the PPP or MP link. There are two options in this field.
◊ Standard PPP—Standard PPP options will be used.
◊ CISCO PPP—Cisco PPP options will be used.
Compression—Turn on the Stac Compression. The default for
this field is Off.
Multiple Link Options: BOD Calculation—Select the direction
of the traffic you wish to calculate in order to determine when to
add or subtract a link. The default for this field is Transmit or
Receive.
Multiple Link Options: Base Trans Rate—Select the base data
transfer rate for this Remote Node. This parameter is in kilobits
per second (Kbps). There are two options for this field:
◊ 64—Only one channel will be used.
◊ 128—Two channels will be used when a packet triggers a call.
PLANET ISDN Router
Advertisement
Table of Contents
