Ordering Your Isdn Line; Collecting General Setup Information - Planet IRT-1001ST User Manual

Ordering Your ISDN Line

If you do not have the ISDN line installed already, we suggest that you
order it from your telephone company as soon as possible to avoid the
long waiting period common when ordering a new line. Use the
information in this section to place the order (see the ISDN Switch
Types chapter for information on provisioning your ISDN line). If you
have already installed your ISDN line, you can check the following
section to make sure that you can use all the features of your IRT-1001
or IRT-1002.
1.
Contact your local telephone company's ISDN Ordering Center.
2.
Find out what type of ISDN service is available. Refer to the ISDN
Switch Types chapter to find out the provisioning information for
the appropriate switch type and ISDN service. For the U.S., the
IRT-1001U and IRT-1002U (U Interface) have been approved by
Bellcore and have IOC (ISDN Ordering Code) " S" Capability, EZ-
ISDN 1.
3.
Provide your telephone company with the proper provisioning
information.
4.
When the telephone company installs your ISDN line, be sure to
obtain the following information:
◊ ISDN switch type.
◊ ISDN telephone number(s).
◊ ISDN Service Profile Identifier (SPID) number(s) (only for

Collecting General Setup Information

Your IRT-1001 or IRT-1002 requires the following system information.
You can obtain all the pertinent information from your network
administrator. Record this information into the worksheet as it becomes
available. This worksheet will later be referred to as you configure your
router.
IRT-1000 series User's Guide
North America).
11