NOTE: The ISDN jack is for ISDN line connection only.
Connection of a phone line may result in damage to your
IRT-1000 product.
Connecting an Ethernet Cable to the Router
Your IRT-1001 or IRT-1002 is equipped with an RJ-45 jack for
connection to a 10BASE-T Ethernet or 100BASE-TX Fast Ethernet hub
or switch via a standard straight-through twisted-pair cable.
Connecting a Power Adapter to the Router
Plug a 12V DC, 500 mA power adapter into the jack on the router's side
panel labeled POWER
At this point, you should have connected the RS-232 cable, the ISDN
phone line, the Ethernet cable, and the power supply. You can now
power up your IRT-1001 or IRT-1002.
The Your IRT-1001 or IRT-1002's Front Panel
Names and descriptions of your router's front panel LEDs are given
below:
POWER—Comes on as soon as you connect the router to the power
supply.
STATUS—Should be blinking if the router is functioning properly.
IRT-1000 series User's Guide
21