Table of Contents
Advertisement
Enter the Remote Node number to edit and you will go to the next
submenu: 11.1 - Remote Node Profile, as shown below:
1.
2.
3.
44
Rem Node Name—This is a required field. Enter a descriptive
name for the Remote Node, e.g., SJHQ. The name can be up to
eight characters long, and must be different from any other
Remote Node name or Remote Dial-in User name.
Active—Press the space bar to toggle between Yes and No.
When a Remote Node is deactivated, it has no effect on the
operation of the router, even though it is still kept in the database,
and can be activated in the future. Deactivated nodes are
displayed with a minus sign [-] at the beginning of the name in
Menu 11.
Call Direction—If this parameter is set to Both, your IRT-1001 or
IRT-1002 can both place and receive calls to/from this Remote
Node. If set to Incoming, the router will not place a call to this
Remote Node. If set to Outgoing, the router will drop any call from
this Remote Node.
Several other fields in this menu depend on this parameter. For
example, in order to enable Call Back, the Call Direction must be
Both.
PLANET ISDN Router
Advertisement
Table of Contents
