Telnet Capabilities
Single Administrator
To prevent confusion and discrepancy on the configuration, your IRT-
1001 or IRT-1002 will allow only one terminal connection at any time.
The router also gives priority to the RS-232 connection over telnet. If
you have already connected to the router via telnet, you will be
logged out if another user is connecting to it via the RS-232 cable. Only
after the other administrator has been disconnected will you be able to
telnet to the router again.
System Timeout
When you are connected to your IRT-1001 or IRT-1002 via telnet,
there is a system timeout of 5 minutes (300 seconds). If you are not
configuring the device and leave it inactive for this timeout period, the
router will automatically disconnect you.
110
PLANET ISDN Router