Table of Contents
Advertisement
5.
Multiple Link Options: Max Trans Rate—Enter the maximum
data transfer rate allowed for this Remote Node. This parameter is
in kilobits per second. There are two options for this field:
◊ 64—At most one channel can be used.
◊ 128—A maximum of two channels can be used.
6.
Multiple Link Options: Target Utility—Enter the two thresholds
separated by a—for subtracting and adding the second channel.
The default is 32-48.
7.
Multiple Link Options: Add Persist—This parameter specifies
the number of seconds where traffic is above the adding threshold
before the router will bring up the second channel. The default is 5
seconds.
8.
Multiple Link Options: Subtract Persist—This parameter
specifies the number of seconds where traffic is below the
subtraction threshold before the router drops the second channel.
The default is 5 seconds.
Once you have completed Menu 11.2—Remote Node PPP Options,
press ENTER at the message 'Press ENTER to Confirm...' to confirm
your selections, or press ESC to cancel your selections.
IRT-1000 series User's Guide
51
Advertisement
Table of Contents
