Table of Contents
Advertisement
The total budget is the time limit for an outgoing call to a Remote Node
or Dial-in User. When this limit is reached, the call will be dropped and
further outgoing calls to that Remote Node or Remote Dial-in User
(callback) will fail. After each period, the total budget is reset. The
defaults for the total budget is 0 minutes and the period is 0 hours. This
means no budget control. The user can reset the total outgoing call time
through this menu. The total outgoing call timer can be program need to
reset itself periodically through menus 11 and 13.
Call History
The call history is erased when you reset Your IRT-1001 or IRT-1002.
The router keeps track of the first ten calls only; additional calls are not
recorded.
The columns in the Call History screen are described briefly below.
1.
Phone Number—The telephone number of the caller (incoming)
or the called party (outgoing). Can contain up to fifteen digits.
2.
Dir—IN for incoming calls, OUT for outgoing calls.
3.
Rate—One of the following: 64K, 56K, X75, or V120. (X75 and
V120 are available for DSS-1 and 1TR6 firmware only.)
IRT-1000 series User's Guide
125
Advertisement
Table of Contents
