Remote Management - ZyXEL Communications GS2210 Series User Manual

Chapter 37 Access Control
Table 146 Management > Access Control > Service Access Control (continued)
LABEL
Timeout
Apply
Cancel

37.6 Remote Management

Use this screen to specify a group of one or more "trusted computers" from which an administrator
may use a service to manage the Switch.
Click Management > Access Control > Remote Management to view the screen as shown
next.
You can specify a group of one or more "trusted computers" from which an administrator may use a
service to manage the Switch. Click Access Control to return to the Access Control screen.
Figure 218 Management > Access Control > Remote Management
304
DESCRIPTION
Type how many minutes (from 1 to 255) a management session can be left idle before
the session times out. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS2210 Series User's Guide