ZyXEL Communications GS2210 Series User Manual page 91

Figure 65 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 30 Advanced Application > VLAN > Static VLAN
LABEL
ACTIVE
Name
VLAN Group ID
Port
*
Control
Tagging
GS2210 Series User's Guide
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes. This name consists
of up to 64 printable characters.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first
to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select Normal for the port to dynamically join this VLAN group using GVRP. This is the
default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with this
VLAN Group ID.
Chapter 9 VLAN
91