Switch Configuration - ZyXEL Communications GS2210 Series User Manual

Click the Display button in the System Log field in the Management > Diagnostic screen to
check for unauthorized access to your Switch. To avoid unauthorized access, configure the secured
client setting in the Management > Access Control > Remote Management screen for telnet,
HTTP and SSH (see
cannot get permission to access the Switch.

46.3 Switch Configuration

I lost my configuration settings after I restart the Switch.
Make sure you save your configuration into the Switch's
nonvolatile memory each time you make changes. Click Save
at the top right corner of the web configurator to save the
configuration permanently. See also
save your configuration.
GS2210 Series User's Guide
Section 37.6 on page 304). Computers not belonging to the secured client set
Section 36.5 on page 291
Chapter 46 Troubleshooting
for more information about how to
343