ZyXEL Communications GS2210 Series User Manual page 109

The following table describes the related labels in this screen.
Table 37 Advanced Application > Filtering
LABEL
Active
Name
Action
MAC
VID
Add
Cancel
Clear
Index
Active
Name
MAC
Address
VID
Delete
Cancel
GS2210 Series User's Guide
DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification only.
Select Discard source to drop the frames from the source MAC address (specified in the MAC
field). The Switch can still send frames to the MAC address.
Select Discard destination to drop the frames to the destination MAC address (specified in
the MAC address). The Switch can still receive frames originating from the MAC address.
Select Discard source and Discard destination to block traffic to/from the MAC address
specified in the MAC field.
Type a MAC address in valid MAC address format, that is, six hexadecimal character pairs.
Type the VLAN group identification number.
Click Add to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the index number of the rule. Click an index number to change the settings.
This field displays Yes when the rule is activated and No when is it deactivated.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays the source/destination MAC address with the VLAN identification number to
which the MAC address belongs.
This field displays the VLAN group identification number.
Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
Chapter 12 Filtering
109