ZyXEL Communications GS2210 Series User Manual page 158

Chapter 21 Policy Rule
Figure 111 Advanced Application > Policy Rule
The following table describes the labels in this screen.
Table 64 Advanced Application > Policy Rule
LABEL
Active
Name
Classifier(s)
Parameters
Set the fields below for this policy. You only have to set the field(s) that is related to the action(s) you
configure in the Action field.
General
VLAN ID
Egress Port
Priority
Rate Limit
158
DESCRIPTION
Select this option to enable the policy.
Enter a descriptive name for identification purposes.
This field displays the active classifier(s) you configure in the Classifier screen.
Select the classifier(s) to which this policy rule applies. To select more than one classifier,
press [SHIFT] and select the choices at the same time.
Specify a VLAN ID number.
Type the number of an outgoing port.
Specify a priority level.
You can configure the desired bandwidth available to a traffic flow. Traffic that exceeds the
maximum bandwidth allocated (in cases where the network is congested) is dropped.
GS2210 Series User's Guide