Example: Dhcp Relay For Two Vlans - ZyXEL Communications GS2210 Series User Manual

Chapter 34 DHCP
Table 133 IP Application > DHCP > DHCPv4 > VLAN > Port (continued)
LABEL
Port
Profile Name
Delete
Cancel

34.5.2 Example: DHCP Relay for Two VLANs

The following example displays two VLANs (VIDs 1 and 2) for a campus network. Two DHCP servers
are installed to serve each VLAN. The system is set up to forward DHCP requests from the
dormitory rooms (VLAN 1) to the DHCP server with an IP address of 192.168.1.100. Requests from
the academic buildings (VLAN 2) are sent to the other DHCP server with an IP address of
172.16.10.100.
Figure 199 DHCP Relay for Two VLANs
For the example network, configure the VLAN Setting screen as shown.
280
DESCRIPTION
This field displays the port(s) to which the Switch applies the settings.
This field displays the DHCP option 82 profile that the Switch applies to the port(s) in this
VLAN.
Select the entry(ies) that you want to remove in the Delete column, then click the Delete
button to remove the selected entry(ies) from the table.
Click this to clear the Delete check boxes above.
VLAN 1
VLAN 2
DHCP:192.168.1.100
DHCP:172.16.10.100
GS2210 Series User's Guide