Figure 41 Status > Port Details
The following table describes the labels in this screen.
Table 8 Status: Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
LACP
TxPkts
RxPkts
GS2210 Series User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the cable type
(Copper or Fiber).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see
Section 13.1 on page 110
for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
Chapter 7 System Status and Port Status
57