ZyXEL Communications GS2210 Series User Manual page 333

Figure 240 Management > ARP Table
The following table describes the labels in this screen.
Table 163 Management > ARP Table
LABEL
Condition
Flush
Cancel
Index
IP Address
MAC Address
VID
Port
Age(s)
Type
GS2210 Series User's Guide
DESCRIPTION
Specify how you want the Switch to remove ARP entries when you click Flush.
Select All to remove all of the dynamic entries from the ARP table.
Select IP Address and enter an IP address to remove the dynamic entries learned with the
specified IP address.
Select Port and enter a port number to remove the dynamic entries learned on the specified
port.
Click Flush to remove the ARP entries according to the condition you specified.
Click Cancel to return the fields to the factory defaults.
This is the ARP table entry number.
This is the IP address of a device connected to a Switch port with the corresponding MAC
address below.
This is the MAC address of the device with the corresponding IP address above.
This field displays the VLAN to which the device belongs.
This field displays the port to which the device connects. CPU means this IP address is the
Switch's management IP address.
This field displays how long (in seconds) an entry can still remain in the ARP table before it
ages out and needs to be relearned. This shows 0 for a static entry.
This shows whether the IP address is dynamic (learned by the Switch) or static (manually
configured in the Basic Setting > IP Setup or IP Application > ARP Setup > Static ARP
screen).
Chapter 42 ARP Table
333