ZyXEL Communications GS2210 Series User Manual page 153

Figure 108 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 59 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Layer 2
Specify the fields below to configure a layer 2 classifier.
Ethernet Select an Ethernet type or select Other and enter the Ethernet type number in hexadecimal
Type value. Refer to
Source
MAC Select Any to apply the rule to all MAC addresses.
Address
To specify a source, select the second choice and type a MAC address in valid MAC address format
(six hexadecimal character pairs).
Port Type the port number to which the rule should be applied. You may choose one port only or all
ports (Any).
Destination
MAC Select Any to apply the rule to all MAC addresses.
Address
To specify a destination, select the second choice and type a MAC address in valid MAC address
format (six hexadecimal character pairs).
Layer 3
Specify the fields below to configure a layer 3 classifier.
GS2210 Series User's Guide
Table 61 on page 155 for information.
Chapter 20 Classifier
153