ZyXEL Communications GS2210 Series User Manual page 138

Chapter 17 Link Aggregation
Figure 98 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 54 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Link
Aggregation
Setting
Group ID
Active
138
DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
The field identifies the link aggregation group, that is, one logical link containing multiple
ports.
Select this option to activate a trunk group.
GS2210 Series User's Guide