Remote Management - ZyXEL Communications XS1930-12HP User Manual

The following table describes the fields in this screen.
Table 157 Management > Access Control > Service Access Control
LABEL
Services
Active
Service Port
Timeout
Login Timeout
Apply
Cancel

36.6 Remote Management

Use this screen to specify a group of one or more "trusted computers" from which an administrator may
use a service to manage the Switch.
Click Management > Access Control > Remote Management to view the screen as shown next.
You can specify a group of one or more "trusted computers" from which an administrator may use a
service to manage the Switch. Click Access Control to return to the Access Control screen.
Chapter 36 Access Control
DESCRIPTION
Services you may use to access the Switch are listed here.
Select this option for the corresponding services that you want to allow to access the Switch.
For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service port by typing
the new port number in the Service Port field. If you change the default port number then you
will have to let people (who wish to use the service) know the new port number for that
service.
Type how many minutes (from 1 to 255) a management session can be left idle before the
session times out. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks.
Note: The timeout period you specified for Telnet sessions also applies to SSH
sessions. Likewise, the HTTP and HTTPS sessions are set to use the same timeout
value.
Type how many seconds (from 30 to 300) the Switch waits before stopping a "trusted"
computer's failed attempt to log in and access the Switch.
Note: The login timeout period you specified for Telnet sessions also applies to SSH
sessions.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
XS1930 Series User's Guide
301