Configuring Dhcpv4 Global Relay - ZyXEL Communications GS2210 Series User Manual

Chapter 34 DHCP
Table 129 IP Application > DHCP > DHCPv4 > Option 82 Profile (continued)
LABEL
Add
Cancel
Profile Name
Circuit-ID
Enable
Field
Remote-ID
Enable
Field
Delete
Cancel

34.4.3 Configuring DHCPv4 Global Relay

Use this screen to configure global DHCPv4 relay. Click IP Application > DHCP > DHCPv4 in the
navigation panel and click the Global link to display the screen as shown.
Figure 193 IP Application > DHCP > DHCPv4 > Global
274
DESCRIPTION
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to their last saved values.
This field displays the descriptive name of the profile. Click the name to change the
settings.
This field displays whether the Circuit ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Circuit ID sub-option.
This field displays whether the Remote ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Remote ID sub-option.
Check the entry(ies) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
GS2210 Series User's Guide